Ayra TDC 4 LED Manual do Utilizador descarregar pdf (Página 6)

Set the correct address on the digital display, you are able to choose a value between 001 and 255.

When a DMX-signal is received, a blinking red dot on the display is active.

Working time: hour:

It is possible to see the total working time of this fixture, by activating this feature.

Test mode: test:

The unit will test all its internal programs.

Channel mode: Chnd

This mode changes the DMX channel mode between 8, 12 and 17. Each mode has its own

characteristics, which makes basic, medium or advanced control possible.

NOTE: At some point, mirror-motors and lenses will be identified by using the numbers 1, 2, 3 and 4.

The numbers apply from left to right. The most left mirror is mirror 1, the most right mirror is mirror 4.

This unit has the following DMX-channels and DMX-values:

8 channel DMX mode

Channel 1: Dimmer intensity

Start value

End value

Function

128

No function

128

255

Dimmer 0-100%

Channel 2: Strobe slow/fast (only works when CH1 is set to 128-255)

Channel 3: Select gobo (channel 4 must be set to off)

Channel 4: Select rotating gobo (channel 3 must be set to off)

Channel 5: Gobo rotation

Start value

End value

Function

127

No function

128

255

Gobo rotation

Channel 6: Gobo rotation speed slow/fast

Channel 7: Scan effect (movement presets)

Channel 8: Scan effect movement speed slow/fast

12 channel DMX mode

Channel 1: Select gobo for Mirror 1

Start value

End value

Function

No function

Gobo 1

Gobo 2

Gobo 3

Gobo 4

111

Gobo 5

112

131

Gobo 6

132

152

Gobo 7

153

173

Gobo 8

174

193

Gobo 9

1 2 3 4 5 6 7 8 9 10 11

Comentários a estes Manuais

Sem comentários

Ayra TDC 4 LED Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Holofotes Ayra TDC 4 LED